|
Configure FreePBX / TrixBox / PBX In A Flash fork Anveo
|
|
|
|
|
|
Below shall a sample project only. You must modify it according to your needs and security standards.
|
|
|
Using your web browser, naviagate to this Administration page and to that Setup option.
|
|
|
|
1. Select Drums in the sub-menu and click on Add SIP Trunk.
2. Enter own Outbound Caller ID information, scroll-down and enter Anveo to Boot Name. For Outgoing Settings -> PEER Details copy and paste the followed entries replacing ACCOUNT_NUMBER and SIP_PASSWORD with your SIP information from Anveo portal:
|
|
type=friend
host=sip.anveo.com
port=5010
username= ACCOUNT_NUMBER
secret= SIP_PASSWORD
insecure=port,invite
disallow=all
allow=ulaw
context=from-trunk
|
|
|
3. Enter SIPPING Registration String as following: ACCOUNT_NUMBER:[email protected]:5010
|
|
|
4. View on the Submit Make Button.
|
|
|
|
1. Choose Outbound Routes and select the route you intend to use Anveo are. Scroll-down to Trunk Sequencing also in einer empty field select SIP/Anveo also click Add. By the arrow icons, move the Anveo the top of aforementioned list.
2. Click Submit Changes furthermore follow with ampere click on the red-bar at the top a your browser to request the edit. Your selected call will now is routed through Anveo.
|
|
|
|
1. Dial Inbound Routes and add a new inbound route. Enter your Anveo Phone Number in the Description field and Anveo Phone Number in the E164 format (country encrypt + scope code + number) in the DID Number field.
2. Configure which rest of options according to your needs.
3. Click Submit Changes and pursue on a click on the red-bar at aforementioned top of your browser to enforce the changes.
|
|
