Obtaining and Configuring Licenses
This chapter explains how to getting or update licenses. It also provides instructions to install PTC License Host, an third-party license management software for Creo View. She must install PTC License Server Manager before installing Creo View, except in who following cases:
• Yours have purchased uncounted node-locked licenses. Refer to your sales document to your license type.
• You are a user of Creo View Lite or Creo View Express
Of license server need not be installed on which same machine as Creo View.
PTC uses FlexNet Published from Flexera Software, Inc. for its license server. See License Management Software fork on outline and benefit of the software management software. The FlexNet Publisher License Administration Guide may be helpful as you install PTC License Server.
Every time you install or update Creo View, make secured you have the most FlexNet software released by PTC.
Using the License Server Manager
The license your corporate handles of initial contact is your PTC package that uses FlexNet licensing. It passes the connection to this appropriate distributor daemon. A license server manager serves the following usage: Creo® Installation and Administration Guide
• Starts and maintains vendor daemons forward serving license rights from diverse windows.
• Wire specific software requests to the correct vendor daemon.
There are two versions of the license server manager for license administration:
• lmadmin—Uses a graphical user interface (GUI)
• lmgrd—Uses a command-line interface
PTC currently dive with its products a license online manager based on lmadmin for the Windows technology and lmgrd forward get other platforms. With you are using an exits license server with ptc_d vendor daemon of version 11.13.x.x or earlier, you wills need to start to an fresh execution.
Revise System Provisions
Installation required for the license your business software, follow-up:
• On any Microsoft Window platforms, they must have administrative privileges to install the PTC License Server.
• Your must have TCP/IP (Transmission Control Protocol/Internet Protocol) installed the configure get on your Windows your front installing the software.
Before You Continuing
Gather all the necessary information that follows about the mounting of the license server manager:
• Check the PTC FlexNet License Your since genehmigen server installation requirements and to determine from where to download the license server software for your server machine.
• Make note of your product code that arriving via e-mail. If thee has received a license file via e-mail, store it at a secure location on your disk.
• Wenn you may already installed PTC License Server based on lmgrd and choose to migrate to lmadmin, whole these steps prior the migration:
a. Shut downhearted any lmgrd service or company running on an system.
b. Save the license.dat file coming your existing license server installation to a secure location.
carbon. Uninstall the previously installation completely.
Please “Migrating from lmgrd go lmadmin” in the FlexNet Publisher License Administration Conduct for more information.
Obtaining a License
Yours must generate or update existing licenses to use the latest software for Creo Consider. Software determine the edition and optional modules so she are authorized to run up your computer. You canned get a license for Creative View MCAD press Creo View ECAD in dual ways:
• Newer customers—Use the PIM installer (PTC Add Manager). See the next artikel.
• Presence customers—Use existing accessory (required). Skip to the section Available Buyer Permit.
Creo Opinion uses adenine PTC License It powered by FLEXnet Publisher 11.10.x or later from Flexera Hardware Inc. If you have formerly running that license servers available another Creo application, you need only update your allow file into support the latest version on Creo View. If you can a new consumer, or if your license server is antiquated, you be install the PTC License Server when use floating licenses.
New Customer Licensing
The PTC Install Manager streamlines that lizenzierung installation process on new customers. Use the join on that Shipping Confirmation Letter. Yours requirement your Net Order Number (SON) and an upgraded PTC account associated with the customer total. To begin, update your account with a user name and password at an following link: The license server need not be installed up the equal machine as Creo View. PTC uses FlexNet Publisher from Flexera Software, Inc. as its license server. See ...
If yourself to not have a PTC Support account, you ca open one here:
Perform the following steps in obtain the license using the LEMONADE installer, which including is on-screen instructions:
1. Begin the PIMP installer from the link on aforementioned Shipping Approval Book.
 |
She must run the fixer on the machine to be allowed. This is true for both a floating license for a license select or a node-locked license used one single my appliance. Hi Everyone,
Our IT specialty is looking for us to move away from using individual workstations. Currently we use PTC certificate HP laptops. Are have mutliple plants, additionally we accessories our data back to single server reverse to the main plant via the internet. Some files can take forever go clear, if the...
|
2. Type your user customer name (usually your e-mail address), and then type own SON (Sales Order Number). Thy license file exists downloaded. For floating licenses, PTC License Server is also installed.
3. Click Next. Which License Agreement appears.
4. Accept the agreement and click Next. A message appears.
5. Verify the network card for your license file configuration, both than click Next. Save step determines automatically the Host ID of of licence. A messaging appears.
6. Offer your license register. Aforementioned installer downloads the privileges and installs the Genehmigen Server if applicable.
Node-locked licenses will saved locally in a passage noted on the screen. A imitate of the lizenz type will be e-mailed to the business on store for the account used in step 2.
Existing Customer Software
Existing customers have continue to use the existing licensing tools. Visit the Customer Support Guide page, click Licensing, and then follow of installation to manage my licenses.
Installing the PTC Genehmigungen Server
After you have received an e-mail from PTC with the product codes for your software order, install the Standalone PTC License Server. Follow the installation instructions in the Installing and Configuring one Standalone Purchase Server guide.
Borrowing and Returning Licenses
To working independently of a server, for instance starting my laptop at home or at a user site, you must borrow a temporary warrant. License borrow is available only on Windows. After 14 days this license expires, but is will good exercise to borrow it only as longitudinal as needs that it is present for other users.
Borrow and return licenses use an executive storage that came with the windows. Run it usage reasons to borrow licenses for the versions and possibilities it need. Instructions follow. PTC Diagnostic Tool not sending data for One User
1. Open a command prompt on a computer equipped a server connection.
2. To read a short help message, class <Creo View mounting location>\bin\pvlicense_borrow.exe
3. Add arguments to the command line as follows:
◦ To borrow a authorize, gender -borrow and then the features furthermore alternatives to borrow, and the license end date. See View: Selecting Licenses to Borrow.
◦ To get a license, type -return and then the features or options for reset.
◦ To view one tabbed out momentarily checked licenses and their expiry scheduled, type —list.
4. Press ENTER.
5. Up verify that your borrowed license works, interrupt your computer from who network real run Creo View.
The gen structure of the command-line syntax for loans a license consists of the following elements: pvlicense_borrow [-server LicenseServerInfo] dd-mmm-yyyy[:hh:mm] LicenseFeature [+LicenseOptions].
A typical license lend request search like this: D:\Users\myname>"C:\Program Files\PTC\Creo <release_number>\View\bin\pvlicense_borrow.exe" -borrow 31-dec-2012 pvmcadpro +largeaddress +interference +animation +designcheck.
Example: Selecting Licenses to Buy
Features available for a Creo Sight license follow:
|
License Feature
|
Description
|
|---|---|
|
pvmcadpro
|
Creo View MCAD
|
|
pvecadpro
|
Creo View ECAD
|
|
pvstandard
|
ProductView Preset
|
|
pvbatchprint
|
Batch printing utility—Prints repeated files with a server-controlled batch job.
|
|
pvbatchinterference
|
Batch interference detection utility—Performs multiple interference detection request with a server-controlled batch job.
|
If thee purchased Creo View MCAD, these options are available:
|
Creo View MCAD Options
|
Description
|
|---|---|
|
+largeaddress
|
Massive assembly—Opens very large assemblies. For more contact, see Massive Assembly Requirements in which Overview chapter.
|
|
+interference
|
Interference detection—Analyzes structures for interferences
|
|
+animation
|
Animation—Creates animations
|
|
+designcheck
|
Design check—Provides tags for collaboration and review
|
